The most current version is to be used where regulatory reference is made to City bylaws, policies, or other provincial or federal design documents. Designers should use the Design Standards in conjunction with the City of Regina Standard Construction Specifications and Standard Drawings.
The Design Standards include information about the design of water, wastewater, storm water, transportation and open space infrastructure. These standards are comprised of the minimum technical standards that must be met when developing lands in the City of Regina. They also apply to all infrastructure projects that deliver the City new or rehabilitated infrastructure assets.
The following Design Standards replace previous information contained within the Development Standards Manual, 2010. The new Design Standards are in effect immediately.
If you have comments or feedback on the Design Standards, contact us.
|General Design Standard*|
|Open Space Design Standard*|
|OS-1: Municipal Reserve Stormwater Management Facility Typical Section|
|Stormwater Design Standard|
|SW-1: Typical Maintenace Bench Cross Sections - Bottom Width ≤ 5m|
|SW-2: Typical Maintenance Bench Cross Sections – Bottom Width > 5m|
|Transportation Design Standard*|
|T-1: Typical Road Cross Sections - Local*|
|T-2: Typical Road Cross Sections - Collector*|
|T-3: Typical Road Cross Sections - Arterial*|
|T-4: Symmetrical Cul-De-Sac*|
|T-5: Offset Cul-De-Sac*|
|T-6: Curb Extensions*|
|T-7: Typical Road Cross Sections - On-Street Greenway*|
|Wastewater Design Standard|
|Water Design Standard|
|Wastewater Lift Station Design Standard|
|Lift Station Electrical Design Standard|
*Coming soon: Design Standards will be added as they become available.